Saturday, July 4, 2015

MarCO: Planetary CubeSats Become Real

We have moved closer to having a new tool set to explore the planets.  For several years, scientists and engineers have talked about using tiny spacecraft, known as CubeSats, for interplanetary missions.  However, a number of daunting engineering challenges have stood between these ideas and reality.  A pioneering mission was needed that would take on those challenges and prove the technologies.

Recently, NASA announced the Mars Cube One (MarCO) mission that will fly two CubeSat spacecraft past Mars as part of its larger InSight Mars mission.  While the MarCO spacecraft will fulfill a specific role in the InSight mission, their real importance likely will be to prove that these tiny spacecraft can be used for deep space missions.

Artist’s illustration of the design for the MarCO spacecraft.  Credit: NASA, JPL/CALTECH

CubeSats were originally conceived to use the revolution in miniaturized electronics to allow university students to design, build, test, and fly their own tiny, complete satellites.  A basic CubeSat is 10 x 10 x 10 cm (1 liter) and weighs no more than 1.3 kilograms   Within that tiny space the satellite has to perform all the essential functions of a spacecraft: power, command and control, communications, and operate a payload that makes some kind of measurement. 

The specification of a standard form factor for these nano spacecraft has allowed companies to offer pre-built subsystems designed to fit within the volume.  (This reminds me, on a much smaller scale, of the industry created by the release of the original IBM PC to supply subsystems for clones and add-ins.)  If one liter of volume proves to be too small for a mission, the specification allows for cubes to be combined to create spacecraft of 2, 3, 6, and 12 liters, or units (U) as they are called, to be built. 

So far, well over a hundred CubeSats (and probably several hundred) have been delivered to Earth orbit.  Sending them into deep space, however, requires simultaneously addressing a number of new technical challenges including:
  • An interplanetary CubeSat must be able to function reliably for months to years, while the lifetime of many CubeSats so far has been measured in days or weeks. 
  • The Earth’s magnetosphere shields Earth-orbiting craft from the potentially electronics-damaging radiation present outside this cocoon.  An interplanetary spacecraft would need to be built with hardier electronics. 
  • Almost all Earth orbiting CubeSats are like bottles tossed into the sea and are carried passively in the orbit in which they were delivered.  A CubeSat traveling to another body in the solar system would need its own propulsion system to make course corrections.
  • For all CubeSats to date, the Earth is never far away and communication is fairly straightforward.  An interplanetary CubeSat must be able to communicate from tens to hundreds of millions of kilometers away.


Solutions to all these problems have been developed and proven for large conventional spacecraft.  CubeSats present the problem of meeting these challenges in a volume about the size of a loaf of bread (a 3U design) or two (a 6U design). 

Many teams are working on these problems (there’s even an annual conference).  The MarCO spacecraft will be the first to make the attempt.

This initial interplanetary flight will focus on an engineering goal instead of a scientific investigation.  The InSight mission will place a lander on the Martian surface that will study Mars’ interior.  During its descent, the lander will relay engineering data that will signal its status and its expected successful touchdown.  Unfortunately, geometry between Earth and the lander’s descent path means it can’t send its data directly back to Earth.  The Mars Reconnaissance Orbiter (MRO, already at Mars) will listen to InSight’s data stream, but its design prevents it from simultaneously listening to the lander and relaying that data back to Earth.  The orbiter then disappears behind Mars as seen from Earth before it can relay its data.  We will not know whether InSight survived its seven minutes of terror for another hour or so until MRO reappears from behind Mars.

The MarCO spacecraft will be positioned so that they can receive and transmit the data from the InSight lander in real time.  Credit: NASA, JPL/CALTECH

The twin MarCO CubeSats will fill this gap with real time relay of the InSight lander’s descent data.  They will flyby Mars at an altitude of 3500 kilometers (just inside the orbit of the Martian moon Phobos) where one antenna will listen to the InSight lander’s UHF broadcast while another antenna relays the data in real time to Earth (using X-band frequencies). 

While the MarCO spacecraft will not conduct scientific investigations, their mission does impose some engineering challenges in addition to those faced by all planetary CubeSats.  First, the spacecraft must operate from the distance of Mars, where the sun is fainter and generating power from the solar cells a greater challenge.  For the crucial data relay, the solar cells must be turned away from the sun to point the antennas to Mars and Earth.  As a result, a capable battery system must be shoehorned into the spacecraft’s internal volume.

A full size mockup of the MarCO spacecraft, with its solar panels and antenna deployed, shows its small size.  Credit: NASA, JPL/CALTECH.

The MarCO spacecraft will be carried into space on the same upper stage that will send the InSight lander to Mars.  Following its release from the booster stage, each CubeSat becomes an independent spacecraft.  It must successfully deploy its solar panels and antennas.  It must survive and operate in deep space without any critical hardware or software failures for six and a half months.  It must keep itself steadily oriented with its solar panels pointed to the sun and later its antennas pointed to Mars and the Earth.  It must keep in contact with its operators on Earth.  It must correctly perform up to five trajectory correction maneuvers to align its trajectory to correctly pass over the InSight landing zone.  It must be able to relay up to eight thousand kilobytes of data per second from distant Mars.  And all this capability must be packaged inside a volume of space that’s about twice the size of the shredded wheat box in my pantry.

Design for the MarCO spacecraft.  Credit: NASA, JPL/CALTECH

The spacecraft designers also have a stretch goal to include a camera.  If they find the time, then we should get postcards of Mars as the spacecraft swing by.

Time to design, build, and test the spacecraft is tight.  Launch comes next March, and the spacecraft will need to be delivered earlier than that to be integrated into the upper stage.


An artist’s illustration of the InSight lander on Mars following its landing and deployment of its instruments.  The MarCO spacecraft will relay data from the lander as it descends to the surface.  Credit: NASA, JPL/CALTECH.

CubeSat spacecraft have been built for as little as several tens of thousands of dollars (plus free student time).  Those figures, though, are only for the tiniest and simplest of CubeSats that operate in Earth orbit.  The MarCO budget reflects the difficultly of building larger, robust, and more capable spacecraft and is $13 million.  This investment, though, will be repaid as the engineering solutions developed for this mission are applied to future planetary CubeSats.  

Following MarCO, planetary CubeSat missions will continue to cost more than their education-oriented Earth orbiting brethren.  A few months ago, NASA solicited proposals for a planetary CubeSat mission that would launch after MarCO and listed a total budget of $5.6 million.  These kinds of prices are similar to those for small instruments on planetary spacecraft.  And that may be the best way to think of planetary CubeSats: small, independently flying instruments.

Fortunately, there seems to be no shortage of ideas for science missions using small, independently flying instruments.  You can read about several of these here, and I plan to have a post later this summer with a number of new ideas.


CubeSats won’t replace traditional, much more expensive planetary spacecraft.  Instead, they promise to give scientists new flexibility to have missions disperse instruments for distributed measurements or to send an instrument or two to carry out a job where the expense of a traditional mission doesn’t make sense.  The MarCO mission will be the first step toward interplanetary CubeSats being used to explore the solar system.

3 comments:

  1. I guess not strictly speaking CubeSats, but I would bring up UNITEC/Shin'en 1 & 2 as examples of interplanetary smallsats...

    Gunter Krebs has write-ups and links.

    V/R,

    ReplyDelete
  2. Some people have talked about cubesats going to the ice giants. I really cant see that happening, but what I can see happening are cubesat missions to the Asteroid belt and NEOs. For instance, wouldnt a cubesat mission to Pallas be an idea? Even a flyby.

    P

    ReplyDelete
  3. The NEAScout mission is the first interplanetary CubeSat funded to perform reconnaissance of an NEO.
    http://www.jpl.nasa.gov/cubesat/missions/neascout.php

    Pallas is a bit out of reach for class of spacecraft due to its high inclination (requires a lot of deltaV to reach) and distance to Earth (telecom would be problematic).

    ReplyDelete