Monday, February 16, 2015

Planetary CubeSats Begin to Come of Age

The story of CubeSats – satellites as small as a water bottle—reminds me of the first years of personal computers.  In their earliest years, personal computers – or microcomputers as they were often called – were built and used by hobbyists who enjoyed geeky tinkering and firmly believed that this infant technology had the potential to revolutionize the world.  (I wanted to get my own microcomputer, but as a fresh college grad, I had to wait a few years until dropping costs and my income found a happy meeting point.) 

To date, CubeSats largely have served as education platforms used to train university students in the basics of building a simple spacecraft.  A number of space agencies and laboratories, though, are now working to evolve these tiny spacecraft so they can take on serious scientific studies, including missions to the moon, asteroids and planets.

CubeSats were invented in 1999 at Stanford University to enable university students to design, build, and fly real satellites.  In the fifteen years since, the standard has taken off with satellites built by numerous universities and several space agencies all contributing to the 138 launches listed by Wikipedia (which admits that its list is incomplete).

A basic CubeSat is 10 x 10 x 10 cm (1 liter) satellite that weighs no more than 1.3 kilograms.  Within that space, the satellite has to perform all the essential functions of a satellite: power, command and control, communications, and possibly operate a payload that makes some type of measurement.  The specification allows for cubes to be stacked to create spacecraft of 2, 3, 6, and 12 liters, or units (U) as they are called, to be built.  (A 3 U CubeSat is about the size of a loaf of bread.)  The total cost for developing a simple CubeSat can be as low as $10,000 (although launch costs can be as much at ten times that).

Today, technology has advanced to the point that several projects are underway to build CubeSat-inspired spacecraft for lunar and planetary exploration.  One of the reasons I say ‘inspired’ is that while many of the proposals would be based on CubeSat 3 U and 6 U sizes, some of the designs use different forms factors while still maintaining the spirit of a nano-spacecraft (less than 10 kilogram) design. 

The other reason I say ‘inspired’ is that a planetary CubeSat will have to take on challenges that their predecessors haven’t.  For many CubeSat missions to date, the focus has been on the learning experience for students, and high reliability and long-life have not been goals.  Also, all CubeSats have orbited the Earth where the magnetosphere shields them from radiation, sunlight is plentiful, and communicating with stations on the Earth is simple.

To operate in deep space to explore the solar system, engineers are taking on the challenges of building reliable, long-lived spacecraft, adding radiation hardening, fitting propulsion systems within the tiny form factor, and communicating across tens and hundreds of millions of miles.  Then there’s the challenge of miniaturizing instruments so they can return data worth the costs of the mission within the tight space, weight, power, and communications restraints of CubeSats.

In addition, many of the challenges of operating and navigating a planetary mission remain the same whether the spacecraft costs $1M or $1B.  Designers of planetary CubeSats will need to develop new ways to run these missions at a fraction of what traditional missions have cost.  (One big challenge: While electronics grow ever cheaper, salaries for mission operations engineers don’t.) 

In other words, CubeSats for lunar and planetary missions are a work in progress.  

I’ve talked with several people knowledgeable about planetary exploration about CubeSats, and their reactions range from enthusiasm to outright skepticism that that these ‘toys’ can be scaled up to meet the challenges of planetary missions.

I spent 25 years in the high tech industry, often working with teams of engineers developing cutting edge technologies.  I learned that if the base technologies exist (you couldn’t have asked an engineer in the 1970s to build a CubeSat), then smart engineers will find a way to do it.  I also learned that the cost of achieving these breakthroughs is often higher than you expect.  Planetary CubeSats are likely to cost in the millions of dollars apiece, and the total cost to make planetary CubeSat technology off-the-shelf equipment may be several tens of millions of dollars.  Even at $5M a pop, though, a CubeSat mission would still cost just a few percent of the cost of the smallest planetary missions in flight today.  For comparison, many instruments on planetary spacecraft cost millions and tens of millions of dollars. 

Another thing I learned in the computer industry is that size and cost revolutions don’t make the big machines obsolete.  The market for big, expensive mainframe computers is alive and well despite personal computers and smart phones (and in many ways, because of them); the new technologies just made mainframes awesomely more capable than their predecessors. 

We will still need highly capable, large, and expensive planetary missions to answer our questions about the solar system.  CubeSats and nano-spacecraft, I believe, will fill holes where the larger missions don’t go or will serve as auxiliary spacecraft for their bigger brethren.  I expect they also will serve to train new generations of engineers and scientists who can learn their arts on inexpensive missions.

I expect that in ten to fifteen years planetary CubeSats will be a proven approach.  It will help that scientists studying the Earth and cosmos also see promise in CubeSats.  Their efforts to build reliable, capable nano-spacecraft also will advance the technological base.
So what might the next decade of planetary CubeSat missions look like?  The examples that follow provide a sampling of the ideas being developed or proposed.  I emphasize that this is a sample of the ideas.  In the week or so it’s taken me to write this, I’ve come across at least a half dozen new concepts and I’ve left out a number of concepts I already knew about.

If you’d like to see more examples of mission concepts and technologies, look at the presentations from these recent lunar, Mars, and asteroid workshops.

INSPIRE

More information here and here. Credit: JPL/NASA

The first CubeSat mission into deep space will likely be JPL’s twin INSPIRE spacecraft.  The goal is to prove the technologies and operations to enable future missions.  The only destination is to get tens of millions of kilometer into deep space while operating a simple payload (a magnetometer and camera).   The design problems the engineers are having to overcome are the same that all future planetary CubeSat missions will face, making this mission a pioneer.  I’m not aware that a launch date has been set.

Lightsail

More information here.  Credit: The Planetary Society

The Planetary Society is planning to launch its own CubeSats, two Lightsails, to test solar sail technology in Earth orbit.  Propulsion is a key challenge for CubeSats.  They are too small to carry significant rocket fuel, and they are often launched as secondary payloads with large satellites whose owners don’t want to incur the risk of launching with an inexpensive CubeSat carrying explosive rocket fuel.  Solar sails use the minute pressure of sunlight to propel themselves.  The Planetary Society has raised funds from private citizens to build their two spacecraft, with the first launch is scheduled for May 2015.  (Other teams are also developing propulsions systems that use other technologies such as low-thrust systems that melt solids to produces low thrust electrosplays.)

Near Earth Asteroid Scout

More information here for the Scout mission; here for the solar sail.  Credit: NASA.

The Near Earth Asteroid Scout CubeSat mission will marry technology developed for the INSPIRE mission with a small solar sail system developed by NASA’s Marshall Space Flight Center.  The mission team will need to develop methods for precision deep space navigation and operation to allow its CubeSat to perform a slowand close  flyby of its target asteroid.  As the spacecraft closes in on a small asteroid, it will take images in four colors with resolutions of as high as 10 cm per pixel.  The spacecraft will be carried aloft on the first flight of NASA’s Space Launch System (SLS), currently expected in 2018. 

Lunar Flashlight

More information here.  Credit: JPL/NASA

The Lunar Flashlight mission is the third approved planetary CubeSat mission that I am aware off.  Like the Near Earth Asteroid Scout, it will use a solar sail, in this case to propel itself to the moon and enter orbit.  Once in orbit, the spacecraft will make use of the highly reflective sail to cleverly solve one of the problems of lunar exploration.  Thanks to previous missions, we strongly suspect that the permanently shadowed, extremely cold craters at the moon’s southern pole harbor some amount of ice.  What we don’t have is a map of the distribution of those ices because, well, it’s dark in those craters and cameras and imaging spectrometers see only shadow.  The Flashlight spacecraft will use its solar sail to reflect sunlight into the craters, providing the light needed for the mission’s spectrometer to map the distribution of ice over the course of 78 orbits.  Like the Scout mission, the Flashlight mission will require a reliable spacecraft (the mission will take approximately 21 months to complete), precision navigation, and sophisticated operations on a nano-spacecraft budget.  Also like the Scout mission, the Flashlight mission will launch on the first SLS flight. 

ExoPlanetSat

With the Earth-orbiting ExoplanetSat telescope, we move from approved, funded missions to concepts for possible CubeSat missions.  A joint project of the Massachusetts Institute of Technology and Draper Laboratory, this spacecraft would, like the Kepler mission, discover planets by watching them transit in front of their stars.  Where the Kepler mission watched thousands of distant stars at a time, the ExoplanetSat mission would watch a single, bright, nearby star, with the first, prototype spacecraft focusing on the Alpha Centauri system.  If the first spacecraft successfully proves the technology, the mission’s proposers hope to launch a number of these spacecraft to watch other nearby stars.  This approach would get around the problem that bright nearby stars are scattered across the sky and cannot be simultaneously watched by a single spacecraft.  (For more information, see here.)

Lunar and Mars Water Distribution Missions (LWaDM and MWaDM)

More information for the lunar concept here, for the Martian concept here, and for the BIRCHES infrared spectrometer here.  Credit: NASA

A key question for both our moon and for Mars is how the distribution of water and ice varies across their globes with the time of day and location.  These CubeSat missions would use miniaturized infrared spectrometers to map water across their surfaces.  The spectrometer for these missions would be a miniaturization of the 11 kilogram New Frontiers Pluto spacecraft’s instrument to ~2 kilograms.

These presentations are frank about the challenges facing designers of planetary CubeSats.
The proposers state that supplying sufficient power and relaying data back to Earth are two key challenges.  For the former, they propose to use next generation solar cells; for the latter, they propose to relay data through larger spacecraft in orbit around these worlds.  At Mars, the large, traditional orbiters such as the Mars Reconnaissance Orbiter and MAVEN carry relay systems designed to support lander and rover missions. These larger orbiters could also relay data from orbiting CubeSats. 

The presentations also list a number of other design challenges including how these spacecraft would be placed in orbit, thermal and radiation protection, and sufficient autonomy to operate with low cost mission support.  Exposing design issues such as these is one of the important roles of these early concepts; they focus attention on areas where solutions are needed. 

Several teams are working on enhancing the communications systems of CubeSats.  Once concept from a team at JPL, for example, would support data rates from Mars of 8,000 bits per second compared to 500,000 to 4,000,000 bits per second for the Mars Reconnaissance Orbiter.  If a Martian CubeSat satellite has to relay its own data back to Earth, though, operating the communications system and the scientific instrument at the same time may stress its power system.

Mars Weather Satellite Network

More information here.  Credit: NASA.

The small size and low cost of CubeSats allow scientists to propose networks of spacecraft that make simple measurements at several places at once.  Traditional large spacecraft typically carry highly capable instruments, but the cost of the spacecraft and its instrument often limits the mission to a single orbiter that can take measurements at just one location at a time.  Many of the proposals for CubeSats for Earth observation are for networks of satellites that make simple simultaneous measurements at multiples places across our globe. 

The instrument proposed for these Martian weather satellites would have two spectral channels, a single detector per channel, and a single telescope.  The equivalent instrument on the Mars Reconnaissance Orbiter now at Mars has nine spectral channels, 21 detectors per channel, and two telescopes optimized for observations in different spectral bands.

Dandelion Mars Lander

More information here. Credit: Malin Space Science System and Stellar Exploration.

Concepts for planetary nano-spacecraft aren’t limited to orbiter and flyby spacecraft.  The Dandelion concept would place several CubeSat-sized landers on Mars to make simple dispersed seismic and weather measurements.  The lander looks rather like an upside down umbrella with a 3 U (10 x 10 x 30 cm) CubeSat as the handle.  During descent, the lander would descend with the decelerator – what looks like the canopy of an umbrella – pointed down to slow the lander to enable a soft landing.  After touchdown, the craft would deploy solar cells, a seismometer, and a mast with cameras and meteorological instruments.  Then each lander would then patiently gather data over the next Martian year (two Earth years), relaying its data through an orbiter back to Earth.

One advantage of the Dandelion concept, and another proposal called MarsDrop, is that multiple small landers could be carried by a larger mission, such as the 2020 Mars rover.  The MarsDrop presentation, though, mentions that development of the first lander might come with a hefty (for a nano-spacecraft mission) price tag: $20-30M.  (See this presentation for more about the MarsDrop proposal.)

Other concepts, such as the Hedgehog, propose to deploy nano-landers on asteroids to explore the surface under the guidance of a nearby mother craft.

Europa

Credit: NASA.

NASA plans to launch a large Flagship mission to Europa in the 2020s that will cost around $2B.  Last year, NASA’s Jet Propulsion Laboratory solicited ideas from universities for CubeSat spacecraft that could serve as auxiliaries to enhance the mission.  JPL selected ten concepts from universities for further study.  Little information was released on the proposals other than a curt statement that read, “The universities' Europa science objectives for their CubeSats would include reconnaissance for future landing sites, gravity fields, magnetic fields, atmospheric and plume science, and radiation measurements.”  I’ve heard rumors that one or more of the proposals may include long-lived CubeSats that would make multiple encounters with Europa.  I suspect that these proposals may be for CubeSats that would conduct magnetometer or radio science flybys that would study the ocean depth and perform gravity studies of the moon’s interior.  Both studies would require simple payloads and low data rates but many passes close to Europa and each CubeSat pass would add to the number the mother spacecraft does.  Perhaps one or more proposals would orbit Jupiter from outside the high radiation fields to continuously scan Europa from afar for active plumes of water and ice expelled from the ocean beneath the icy crust.  Other proposals might include CubeSats that image the surface from heights too low to be deemed safe for the main, expensive spacecraft.

Jupiter Atmospheric Probes

More information here.  Credit: J. Moore/York University

Sometimes, being tiny may be an enabling capability in its own right.  NASA once had the technology to build and test heat shields that could withstand the searing heat of entry into Jupiter’s atmosphere by a large probe, which enabled the Galileo mission to do so in 1995.  Since then, that entry technology has been lost and it is too expensive to replicate. 

A team lead by John Moores from the Centre for Research in the Earth and Space Sciences (CRESS) at the York University in Canada has proposed that a spacecraft could carry up to six atmospheric probes that incorporate CubeSat technologies to make them small and lightweight.  The peak heat load these probes would experience during entry would be one-seventh that of a traditional large probe, enabling these probes to be built with existing entry technologies.  Each probe would be too small to carry a full complement of instruments, so the instruments would be divided among the probes. 

Jupiter’s atmosphere is complex and the Galileo probe studied it in just one location that turned out to be atypical.  Micro-probes might allow scientists to study additional locations from within Jupiter’s atmosphere.

Small Innovative Missions for Planetary Exploration (SIMPLEX)

In December of 2014, NASA released an announcement of opportunity for teams to propose a new planetary CubeSat mission.  The request specifies, “This solicitation supports the formulation and development of science investigations that require a spaceflight mission that can be accomplished using small spacecraft… Investigations of extra-solar planets are not solicited... Proposals to this program element may propose to use 1U, 2U, 3U, and 6U form factors… This program element encourages, but does not require, the submission of CubeSat investigations that operate in interplanetary space, and would, therefore, meet more demanding engineering and environmental requirements than has been experienced by previous CubeSats. While it is expected that proposed investigations would involve some advanced engineering development of instruments and/or spacecraft systems technology, all proposals must include a science investigation that will return and publicly archive usable scientific data and result in the publication of results in refereed scientific journals… Proposals should plan on launch readiness by September 30, 2018… The Life Cycle Cost of an investigation selected through this solicitation may not exceed $5.6M.”


Multiple space agencies have shown that they are serious about developing the technologies for scientific CubeSat missions.  This latest request from NASA gives the scientific community a chance to propose their ideas to both develop the potential of CubeSats and to conduct meaningful a scientific mission.  I’m looking forward to seeing what creative idea is selected.

No comments:

Post a Comment